Description
The True Precision threaded barrel for the Glock 26 replaces the factory 3.43 inch barrel with a 4.28 inch barrel that carries 1/2×28 threads for a suppressor or compensator. True Precision built it as a drop-in match barrel for the subcompact double-stack Glock and lists it for every generation of the G26, which is unusual; most makers split Gen 5 from the earlier guns. True Precision calls it drop-in ready but recommends a fit check because factory tolerances vary.
True Precision machines it from USA-sourced certified 416R stainless steel with a proprietary broach cut 6-groove bore at a 1:10 twist, which the company says is safe for cast lead. The chamber is fully supported and SAAMI spec 9×19, and the muzzle has an 11 degree target crown. It ships with True Precision’s high-heat Viton O-ring lock thread protector. The black nitride finish matches the factory slide.
Fitment: True Precision lists this barrel (part TP-G26B-XTBL) for the Glock 26 Gen 1 through Gen 5, the Glock 26X, and the Lone Wolf Nomad 9SX. It will not fit the Glock 19, 43, 43X, or 48, and it is not for the Glock 27 or 33 unless you are doing a caliber conversion, which True Precision does not list for this part.
Pairs with: True Precision S Micro Compensator (1/2×28, 9mm, Black DLC); True Precision Cobra Micro Compensator (1/2×28, 9mm, Black Nitride).
Specs
- Fits: Glock 26 Gen 1 through 5, Glock 26X, Nomad 9SX
- Caliber: 9mm Luger
- Thread pitch: 1/2×28
- Length: 4.28 in overall (threaded)
- Material: 416R stainless steel
- Finish: Black nitride
- Rifling: Broach cut, 6 groove, 1:10 twist
- Chamber: SAAMI spec 9×19, fully supported
- Includes: O-ring lock thread protector
- Manufacturer part number: TP-G26B-XTBL
- UPC: 719104535379
- Made in: USA
Who it’s for
Glock 26 owners of any generation who want a threaded muzzle for a compensator or suppressor, and PCSL or Tactical Games shooters who run a subcompact in a division that allows a muzzle device.
Who should skip it
If you shoot a Glock 19, this barrel is too short for that slide; look at the Glock 19 threaded barrels from Ballistic Advantage, Faxon, or True Precision in this batch. If you carry a slim-frame 43 or 43X, use the SilencerCo, Backup Tactical, or True Precision 43/43X barrels instead. One thing to know: with the thread protector on, the muzzle sticks out almost an inch past a G26 slide, so most subcompact holsters will not close over it. USPSA Production and Carry Optics do not allow a threaded barrel with a device attached.
