Description
The Timney Alpha Pivot for Gen 5 is the Alpha Competition trigger built for the Gen 5 trigger housing and fitted with Timney’s alternate shoe. Instead of the center blade that sticks out of a factory Glock trigger, this shoe uses what Timney calls an “internal pivoting safety”: the lower part of the flat face hinges and has to be pressed to release the trigger, so you get a clean flat face with nothing poking your finger. Timney says it is for shooters who “want an alternative to the traditional blade-style trigger safety.” The rest is standard Alpha: Timney’s aluminum sear housing, machined trigger bar and shoe replace the factory trigger, bar and housing, and Timney states it “uses all stock Glock parts and springs,” so your factory connector, firing pin and firing pin safety spring stay in the gun. Timney lists it as “ONLY COMPATIBLE WITH STOCK GLOCK PISTOLS – INTENDED FOR COMPETITION USE ONLY,” and says it “can be installed easily with no gunsmith needed.” Keep a Glock armorer tool or a 3/32 punch and bench block handy for the trigger pin and housing pin.
Timney lists a 3 pound pull weight and a “crisp trigger break.” The shoe is a straight, flat face aluminum trigger with the pivoting safety built in, anodized black. The trigger bar and sear are Teflon nickel (NP3) coated, which Timney says “virtually eliminates friction.” A retailer listing (GlockStore) itemizes the box as the flat face aluminum trigger with internal pivoting safety, the sear, return springs, and a C washer; Timney’s blog describes two return springs, a light gray and a heavier red, so you can pick reset feel. Timney does not publish pre-travel or reset distances. Timney’s blog notes a pre-travel adjustment in the sear housing and warns that removing too much pre-travel can partially disengage the factory safeties. On safeties, Timney’s blog states that “all three factory Glock safeties are also fully functional with the Alpha. The drop safety, firing pin stop, and trigger safety all work the same as the stock setup.” Thing to know: the pivoting face changes how the trigger safety feels. There is no blade to find with your fingertip; the whole lower face moves, which some shooters like and some find vague. If you can, try one before you commit.
Fitment: Gen 5 double stack Glocks in 9mm and .40 S&W. Timney and its retailers list the G17, G19, G19X, G22, G23, G26, G27, G33, G34, G35, G45 and G47; one retailer also lists the G44. MOS slides make no difference to the trigger. It will NOT fit any Gen 3 or Gen 4 Glock, which use a different trigger housing and trigger bar and take the Gen 3-4 Pivot. It will NOT fit the Gen 5 large frame 10mm and .45 guns (G20, G21, G29, G30 Gen 5), which take Timney’s Gen 5 large frame pivot. It will NOT fit the slimline G43X or G48. Timney states it is compatible only with stock Glock pistols, so aftermarket connectors, frames or fire control parts are not covered.
Also in the Pro Shop: Apex Action Enhancement Kit for Gen 5, Tyrant CNC I.T.T.S. for Gen 5, CMC drop-in for Gen 5 and Gen 6, and threaded barrels for Glock.
Specs
- Fits: Glock Gen 5, 9mm and .40 double stack: G17, G19, G19X, G22, G23, G26, G27, G33, G34, G35, G45, G47 (MOS included)
- Pull weight: 3 pounds (Timney stated)
- Type: drop-in trigger group: shoe, trigger bar, and sear housing; reuses the factory connector and factory springs
- Shoe: flat face, straight, anodized aluminum, black, with internal pivoting safety (no external blade)
- Adjustable: Timney’s page lists no adjustment; Timney’s blog describes a pre-travel adjustment that Timney cautions against changing
- Safeties: Timney states the trigger safety, firing pin safety and drop safety all remain functional
- Includes: trigger shoe with bar and pivoting safety, sear housing, return springs, C washer (per retailer listing)
- Manufacturer part number: ALPHA-GLOCK-PIVOT-5-BLK
- UPC: 081950748662
- Made in: USA, with Timney’s lifetime warranty
Who it’s for
Gen 5 G17, G34, G45 and G47 shooters in USPSA Carry Optics, Limited Optics or Open who want the Alpha’s 3 pound break without a blade in the trigger face, and Gen 5 G19 owners running PCSL or steel matches.
Who should skip it
Gen 3 and Gen 4 owners need the Gen 3-4 Pivot we also carry; this housing will not fit an earlier frame. If you want a blade you can feel and index on, the standard Gen 5 Alpha in black or red is the same trigger with the conventional safety. A 3 pound striker-fired trigger is a range and competition trigger, not a duty or carry trigger; many departments and some instructors say no, and Timney labels this for competition only. For a smaller change that keeps the factory housing, the Glock Performance Trigger for Gen 5 or an Apex or Overwatch Precision shoe is the alternative. USPSA Production and Carry Optics allow aftermarket triggers, bars, connectors and springs with no minimum pull weight, as long as the trigger safety still works and the pistol is on the approved list; Limited, Limited Optics and Open have no trigger rules. IDPA SSP allows internal trigger work but no visible external changes, so an aftermarket shoe is out; IDPA ESP, CCP and CO allow replacement triggers but not add-on trigger shoes. Read the current rulebook before a major.
